Master in Civil Engineering

Top 76 Master's Programs in Civil Engineering 2019

Civil Engineering

A Masters degree gives you the opportunity to either further your understanding of a particular question or take off in a completely different way using skills you have gained from your previous undergraduate degree.

Many who pursue a higher education in engineering then go on to lead careers in civil engineering, which involves the creation and maintenance of civilian structures. This is done both in the public and private sectors.

 

Master's Degree in Civil Engineering

Read More

Civil Engineering

International Accelerator
Campus Full time Part time September 2019 USA Boston

The Master's degrees offer students a chance to advance their knowledge above that of the undergraduate level, and a chance to begin to specialize in one of the sub-disciplines of Civil or Environmental Engineering. [+]

Civil Engineering

Master's programs

The Master's degrees offer students a chance to advance their knowledge above that of the undergraduate level, and a chance to begin to specialize in one of the sub-disciplines of Civil or Environmental Engineering. All Master's degrees may require that students take one or more undergraduate courses as articulation (pre-requisite) if they are coming from a different undergraduate engineering or a related science field in order to become fully prepared for graduate work in Civil or Environmental Engineering.

Thesis Option

The Master's degree programs can either be research-oriented (thesis option) or non-research-oriented (non-thesis option). The Thesis option is the only option for students who are receiving a fellowship or assistantship (GTA or GRA) from the department. Therefore, it is strongly recommended for all full-time students, even those who think that they can pay for their own education. A minimum of twenty-four (24) semester hours of approved coursework along with a minimum of six (6) hours of thesis credits is required.... [-]


Master of Engineering in Civil Engineering

Magdeburg-Stendal University of Applied Sciences
Campus Full time October 2019 Germany Magdeburg

The master's course in civil engineering is a practical course with two fields of concentration: constructive engineering as well as geotechnical and traffic engineering. [+]

No restricted admission. Start of studies The programme begins in winter and summer semesters. Applicants with foreign certificates please apply please apply till 31 July (winter semester) or 31 January (summer semester) via uni-assist e.V.. Programme objectives

The master's course in civil engineering is a practical course with two fields of concentration: constructive engineering as well as geotechnical and traffic engineering. The focus of the concentration on constructive engineering lies in the design, construction and calculation of supporting structures in building construction and bridge construction. The knowledge obtained during the bachelor's course is reinforced and extended. Expertise from specialist knowledge in steel, solid, timber and civil engineering and on modern calculation techniques and methods are extensively communicated. The fields of concentration in civil and traffic engineering prepare the students for current and future demands in geotechnics, in transportation and bridge engineering as well as in environmental geology. These sometimes involve complicated substrate conditions or requirements in terms of environmental protection, area recycling, modern disposal engineering and flood prevention. The planning and construction of transport routes is another key area of this field of concentration.... [-]


Online Master of Civil Engineering

Norwich University Online Programs
Online Full time 18  September 2019 USA Northfield

Few career paths are as vital as civil engineering when it comes to creating the future of modern civilization.

[+]

MASTER OF CIVIL ENGINEERING - ONLINE

Few career paths are as vital as civil engineering, when it comes to creating the future of modern civilization. Civil engineers are essential in supporting and improving aging infrastructure, developing new structures, and maintaining environmental standards for optimal sustainability.

Norwich is the first private university in the United States to offer a civil engineering program. Therefore, this program offers you a long, proven history of success, as well as contemporary relevance. Curriculum has been developed in alignment with recommendations from the American Society of Civil Engineers (ASCE) and blends civil engineering technical competencies with business management principles and project management fundamentals. The comprehensive curriculum will provide you with the knowledge to efficiently manage projects from design to implementation. Our learning model combines relevant theory with real-world application for immediate results. ... [-]


MEng in Welding Engineering

University of the Witwatersrand
Campus Full time February 2019 South Africa Johannesburg

Wits University offers the International Institute of Welding course leading to the IWE ( International Welding Engineer -[BScEng graduates]) and IWT ( International Welding Technologist [BTech graduates]). Wits University is an Approved Training Body (ATB) for the International Institute of Welding (IIW). Successful completion of the courses (60% min/each module and a 95% attendance record) entitles the candidate to apply for IIW registration. [+]

Wits University offers the International Institute of Welding course leading to the IWE ( International Welding Engineer -[BScEng graduates]) and IWT ( International Welding Technologist [BTech graduates]). Wits University is an Approved Training Body (ATB) for the International Institute of Welding (IIW). Successful completion of the courses (60% min/each module and a 95% attendance record) entitles the candidate to apply for IIW registration.

Benefits of the programme

The intent is to equip candidates for a career in the welding industry, this implying an understanding of the practice of welding engineering underpinned by sound science.

Curriculum Outline / Modules taught

The MEng in Welding Wits is made up of 12 courses divided into four main modules. The modules are welding processes, welding metallurgy, welded joint design and fabrication, and applications and case studies.... [-]


Master of Engineering in Fire Protection Engineering

University of Maryland, A. James Clark School of Engineering
Campus Full time Part time 1 - 5  January 2019 USA College Park + 1 more

The University of Maryland offers a Master of Engineering and Graduate Certificate in Engineering in Fire Protection Engineering via both on-campus and distance programs. While some students take courses via both modes, most students chose to take courses either on campus or via the distance option. This page addresses the courses and requirements for students enrolled in the on-campus classes. [+]

Master's Programs in Civil Engineering. Admission Requirements A bachelor’s degree, GPA of 3.0 or better, in engineering or a related field from an accredited institution Courses in structural mechanics*, differential equations, fluid mechanics and heat transfer *Structural mechanics is not required for students interested in pursuing the Online Graduate Certificate in Engineering degree. Structural mechanics is required for students interested in pursuing the Master of Engineering degree on campus who are interested in taking a course in structural fire protection, either ENFP 405 or ENFP 621 [-]

Master in Structural Engineering - Civil Engineering

Technical University of Civil Engineering Bucharest
Campus Full time September 2019 Romania Bucharest

Accredited by the Romanian Ministry of Education since 2013, the masters “Structural Engineering” are 2 years post graduate programs, with teaching and examinations entirely in English language or in the French language. [+]

Let’s design the future together!

Accredited by the Romanian Ministry of Education since 2013, the masters “Structural Engineering” are 2 years post graduate programs, with teaching and examinations entirely in English language or in the French language.

Organised within the Faculty of Engineering in Foreign Languages (FILS) of the Technical University of Civil Engineering Bucharest (UTCB), the masters contains 3 semesters with lectures and exams and 1 semester entirely devoted to the master thesis. The master programs have a total of 120 ECTS (European Credit Transfer and Accumulation System).

The masters are opened to Romanian and foreign bachelor graduates. They also accommodate Erasmus+ exchange students. UTCB has 67 Erasmus+ agreements with universities from 17 countries. For the academic year 2016-2017 over 15 Erasmus students from France, Spain and Greece already registered to our masters.... [-]


Master in Civil and Environmental Engineering

University of Brescia
Campus Full time October 2019 Italy Brescia

The Master's Degree Course intends to educate graduates who have an in-depth knowledge of the theoretical and scientific aspects of engineering, both in general and in-depth concerning environmental and land engineering. [+]

Entry requirements:

Having adequate knowledge at the level of a Bachelor's degree, consistent with the disciplines covered by the Master's Degree course.

Duration of the course:

2 years (120 credits)

Educational goals:

The Master's Degree Course intends to educate graduates who have an in-depth knowledge of the theoretical and scientific aspects of engineering, both in general and in-depth concerning environmental and land engineering, allowing them to identify, formulate and solve, also in an innovative manner, complex problems or problems which require an interdisciplinary approach; think up, plan, design and manage complex and/or innovative systems, processes and services; design and manage highly complex experiments.... [-]


Master's Degree in Structural Engineering

Gheorghe Asachi Technical University Of Iasi
Campus Full time October 2019 Romania Iași

Master Program “Structural Engineering” is a modern interdisciplinary study program offered at the Faculty of Civil Engineering since 2005-2006, the first master program taught in English in the field of Civil Engineering from Romania. [+]

In brief Faculty Name: Faculty of Civil Engineering and Building Services Study domain: Civil Engineering Name of the university program: Structural Engineering Language of instruction: This study program is offered both in English and Romanian. Type of studies (full time, part time, distance learning): Full time Standard length of studies (in years) & number of semesters: 2 years/4 semesters Number of ECTS Credits (on semester and on length of studies): 30 credits/semester, 120 credits in total Academic calendar (starting and ending dates of the courses): October 1st – June 30th. Extended to September 30th for re-examinations.

Master Program “Structural Engineering” is a modern interdisciplinary study program offered at the Faculty of Civil Engineering since 2005-2006, the first master program taught in English in the field of Civil Engineering from Romania. The master program is intended to help the students gain expertise in designing civil engineering structures, develop skills in construction project management, finite element analysis and not only. The program gives additional qualifications on Management of European and international research projects and Business communication and ethics/legislation.... [-]


MEng in Civil Engineering

Northern Arizona University
Campus Full time August 2019 USA Flagstaff

The Master of Engineering is a non-thesis professional degree, based primarily on coursework and/or on an engineering project designed with the guidance of a faculty advisor to address a need or problem specific to their engineering field of study (Civil, Environmental, Electrical, or Mechanical Engineering). [+]

This degree provides you with a broad, practice-based education.

Degree requirements

To earn this degree, you must complete a total of 30 credit hours:

applied mathematics course, in a relevant topic such as numerical methods, linear algebra, or statistical analysis (3 credit hours). engineering management course (3 credit hours).

24 credit hours from:

general engineering, environmental engineering, civil engineering, mechanical engineering, or geology, selected with your committee’s approval (15 credit hours). elective courses (9 credit hours), which can include up to six credit hours in an optional practice-oriented project. Admission information

Applicants must select one primary emphasis in:... [-]


International Master's Degree in Metallurgical Engineering and Geometallurgy

Camara Minera Del Peru
Online Part time October 2019 Peru La Molina

The graduate of the Master's Degree in Metallurgical Engineering and Geometallurgy, will be able to perform in aspects of consulting and technical management of metallurgical processing plants, conducting research to provide new alternatives for metallurgical recovery of minerals and increasing the economic value to mining companies . Emphasis is placed on the explanation of current legislation and regulations both in the international arena and in representative countries of the region. [+]

Start: October 22, 2018Modality: VirtualDuration: 02 YearsCase Analysis: Peru, Mexico, Colombia and Chileobjective

The graduate of the Master's Degree in Metallurgical Engineering and Geometallurgy , will be able to perform in aspects of consulting and technical management of metallurgical processing plants , conducting research to provide new alternatives for metallurgical recovery of minerals and increasing the economic value to mining companies . Emphasis is placed on the explanation of current legislation and regulations both in the international arena and in representative countries of the region.

Duration and Modality

02 years approximately, Virtual.

Certification

The Mining Chamber of Peru will grant the international certification to the graduate that meets all the necessary requirements.... [-]


Master in Prototyping Future Cities

Higher School of Economics
Campus Full time September 2019 Russia Moscow

The programme will focus on the issues of urban planning and management using new city models and technologies. It will be led by international and Russian scholars and experts who are forming the current agenda for smart city development in Russia and worldwide. [+]

Master's Programs in Civil Engineering.

The programme focuses on the issues of urban planning and management using new city models and technologies. It is led by international and Russian scholars and experts who are forming the current agenda for smart city development in Russia and worldwide. The key principle of the programme is learning by doing. The programme takes place in a laboratory-type environment where students try new technology, prepare prototypes, investigate and analyse the city through data, and develop projects that come as a relevant response to complex problems that affect modern cities.

The programme invites architects, designers, engineers, economists, entrepreneurs and graduates interested in the management of cities and technologies. The skills acquired during the programme provide the graduates with a variety of career opportunities in large technological companies, city administrations or their own innovative businesses.... [-]


Master in Civil Engineering, Hydraulic Engineering, Naval Architecture and Ocean Engineering

Tianjin University
Campus Full time September 2019 China Tianjin

This program aims to cultivate future graduate students and help them grasp the fundamental theory of mathematics and mechanics, get an in-depth and systematic understanding of the knowledge and meet the research frontiers in the three majors - civil engineering, hydraulic engineering, naval architecture and ocean engineering. [+]

Master in Civil Engineering, Hydraulic Engineering, Naval Architecture and Ocean Engineering

Length: 2 years

Study pace: Full time

Education level: Master Degree

Institute: School of Civil Engineering, Tianjin University

Location: Tianjin, China

Language: English

Program Webpage:

http://www.tju.edu.cn/sie/en/xwxm/qywskxwxm/ss/201602/t20160223_270467.html

Introduction

This masters program aims to cultivate future graduate students and help them grasp the fundamental theory of mathematics and mechanics. Students will get an in-depth and systematic understanding of the knowledge and meet the research frontiers in the three majors:... [-]


Master in Earthquake Engineering

European Polytechnical University
Campus Full time October 2019 Bulgaria Pernik

This Master's program aims at enhancing and deepening civil engineers' qualification in the field of anti-seismic security of buildings and facilities during their design and implementation. [+]

This Master's program aims at enhancing and deepening civil engineers' qualification in the field of anti-seismic security of buildings and facilities during their design and implementation.

Bulgaria and many other countries have active seismic activities on their territories, which presupposes that they should be secured against this destructive natural phenomenon.

Taking special measures during the design of the buildings and facilities against seismic activities is related to one of the main requirements to investment projects – securing people's health and life.

The program trains specialists in the areas of geophysical and earthquake engineering who are capable of evaluating, predicting and reducing the risk of earthquakes.... [-]


Master of Natural Hazards and Risks in Structural Engineering

Bauhaus-Universität Weimar
Campus Full time October 2019 Germany Weimar

The Natural Hazards and Risks in Structural Engineering (NHRE) master’s degree program has a strong international orientation. [+]

Master of Natural Hazards and Risks in Structural Engineering

The Natural Hazards and Risks in Structural Engineering (NHRE) master’s degree program has a strong international orientation. It trains students to apply themselves to demanding engineering tasks with regard to specific external influences, such as earthquakes. We teach students how to use modern equipment to assess the dangers and damage potential of natural phenomena, we show them how to create models and simulations, and we prepare them for conducting projects and- risk analyses of their own.In this way, the program provides students with key qualifications for engineering positions which require innovative, enterprising solutions for dealing with a wide variety of natural dangers, like earthquakes, floods and storms.The occurrence of an increasing number of natural hazards all over the world and their various effects on individuals, societies and modern economies is one of the major challenges for future decades. The master course in "Natural Hazards and Risks in Structural Engineering" faces this challenge by providing indispensable tools for taking into account those phenomena in the different design processes in civil engineering. Thereby, the master course aims at combining practical structural engineering with state-of-the-art concepts regarding computational mechanics, dynamics and probability theory/stochastic analysis. Consequently, the master course provides key qualifications for innovative work in the field of earthquake, flood and wind engineering and offers an international setting in which students will achieve both technical success and personal advancement.Main areas covered by the master course in "Natural Hazards and Risks in Structural Engineering" are... [-]


ME in Civil and Environmental Engineering

Clarkson University Graduate School
Campus Full time Part time 1 - 2  September 2019 USA Potsdam + 1 more

The Master of Engineering (ME) program in the Department of Civil and Environmental Engineering focuses on engineering practice and design. It can be completed within one calendar year and consists of up to 24 credits of graduate-approved coursework, (up to 18 in the major subject area and six in a minor area), and up to seven credits from a design project. [+]

The Master of Engineering (ME) program in the Department of Civil and Environmental Engineering focuses on engineering practice and design. It can be completed within one calendar year and consists of up to 24 credits of graduate-approved coursework, (up to 18 in the major subject area and six in a minor area), and up to seven credits from a design project.

A design project is an integral part of the Master of Engineering program. It is intended to be an intensive team experience managed by the students and involving the examination and analysis of a real-world problem followed by the implementation of a design decision. Often, the problem will be drawn from the actual experiences of the design engineers who are available for interaction with the design team. The design team will be responsible for the preparation of written interim and final reports and, at the conclusion of the program, will make a formal non-graded presentation open to students, faculty and other interested parties.... [-]